Wednesday, January 06, 2016

IR (Infrared) Communication Between Two Microcontrollers -Step By Step Tutorial : LAST PART

PART 1 : Basic Introduction 

PART 2 : Interrupt 

PART 3 : Timer

PART 4 : Calculation

PART 5 : LED Switching Project [END]

 

IR Controlled LED Switching : 5th & LAST PART



I have to make it quick and I think we have got all required information. I ain't going to describe source code. You have to help yourself. It has become already too long.
I can honestly say that I tried my best. Today I am going to finish this series and it's the last part.

So first of all, take a look at calculation part.

Final Calculation :

 

To identify each bit uniquely, we will use another calculation method. You may use as you want. I ain't going to use millisecond. You can use millisecond or microsecond if you want. 

If you want to use millisecond to measure pulse, then for logical 0 you get (562us_on+562us_off)=1.124ms. and for logical 1 you get (562us_on+1687us_off)=2.249ms.

You know, for each task  microcontroller needs time. That's why reading can be varied from calculation. So if you use integer number, you will get 1ms for logical 0 and 2ms for 1. By applying this you may successfully able to make it. Alright.


Now I am going to show about my method that was used on my project:

we know that , 1secon means=750000 pulses. Alright.
So, 1000ms means=750000 pulses and 1000000us means=750000 pulses.

 Now, 1000000us means=750000 pulse
 and   1us     ,,  = (750000/1000000)=0.75 pulses
 and  562us   ,,   =(0.75*562)=421.5=421 pulses

Again,
So, 1000000us means=750000 pulse
 and   1us     ,,  = (750000/1000000)=0.75 pulses
 and  1687us   ,,   =(0.75*1687)=1265.25=1265 pulses



So, for logical 1 :

(562+1687) or (421.5+1265.75)=1686 pulses

Now, we know 255 pulses means 1 interrupt(timer overflow) or Count=1.
 So ,                      1    ,,     ,,    (1/255)
 So ,                    1686   ,,     ,,   (1686/255)=6.62

So, we can say 6.62 interrupts means logical 1. In coding we I will use 5 or 6 or 7 to identify logical 1 in proteus.



So, for logical 0 :


(562+562) or (421.5+421.5)=843 pulses

Now, we know 255 pulses means 1 interrupt
(timer overflow) or Count=1.
 So ,          1    ,,     ,,  (1/255) or count=(1/255)
 so ,        843   ,,     ,,   (843/255)=3.31 or count=3

So, we can say 3.31 interrupts means logical 0. In coding we I will use 2 or 3 or 4 to identify logical 0 in proteus.
By using this technique, from count variable we can identify logical 1 or logical 0.



***Transmitter Section(Important):


 In source code of transmitter , 4 commands are used .

  

  #define command_2 0x81 or 10000001
  #define command_3 0x42 or 01000010
  #define command_4 0xC3 or 11000011
  #define command_5 0x24 or 00100100 



Here blue color represents 4bit command and red color represents reverse order of the main 4bit command (blue colored).To avoid noise and to achieve clear signal we need this.



Consider that we have main 4bit command 0001.So the reverse command should be 1000 command .Now we have to attach these and that will be 10000001. Finally we get 8bit command in which a main command and a reverse of that command are saved .


Now We need some knowledge about PWM(Pulse Width Modulation)


We will use PWM to generate 36KHz pulse and that's why we will connect positive(+) pin of Transmitter unit  Microcontroller's  CPP1 pin . Because using that pin of Microcontroller will generate 36KHz pulse .



PWM1_Init(36000); will set up the CPP1 pin for PWM .


PWM1_Set_Duty(127); 


set_duty(127) is used to providing same for both ON and OFF .That means (T/2) time it will ON and (T/2) time it will OFF .If we use set_duty(255) , then total Time period (T) will be remain ON. If we use set_duty(0) , then total Time period (T) will be remain OFF.    
Look at this photo.
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )

IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )

 

Again look at another picture given below

  Here in if statement , an AND operation performed between Command and 0x01 . We are using this to identify each bit of data command.
Suppose , our command is 10000001 and 0x01=00000001.So ,when an AND operation performs the result will be like this.

IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )
Shifting Operation in Programming

Shifting Operation in Programming
Shifting Operation in Programming

 

So, if result is 1 ,then the related bit is 1 and delay should be 1687us.

So, if result is 0 ,then the related bit is 0 and delay should be 562us.

 

***Receiver Section(Important):

Here this part of code is comparing that Data signal commands received in receiver unit are correct .


   if(val[7]==val[0]){  
    txt[7]=val[7];  
   }  
   if(val[6]==val[1]){  
    txt[6]=val[6];  
   }  
   if(val[5]==val[2]){  
    txt[5]=val[5];  
   }  
   if(val[4]==val[3]){  
    txt[4]=val[4];  
  }  

   if(txt[4]=='0' && txt[5]=='0' && txt[6]=='0' && txt[7]=='1') {  
     PORTB.F6=1;  
     PORTB.F5=0;  
     PORTB.F4=0;  
     PORTB.F3=0;  
   }  


 When microcontroller understands about the 4bit command "0001" , consequently it turns ON RB6 pin or First LED .  

# IR-Controlled LED Switching in Proteus 8.

Source Code :

Transmitter:

 


 #define address  0xff  
  #define command_1 0xFF  
  #define command_2 0x81  
  #define command_3 0x42  
  #define command_4 0xC3  
  #define command_5 0x24  
 unsigned int i=0,j=0;  
 void repeat(){  
 PWM1_Start();  
 delay_us(8000);  
 PWM1_Stop();  
 delay_us(8000);  
 }  
  send_data_byte(unsigned char dattt){  
   PWM1_init(36000);  
 PWM1_Set_Duty(127);  
  for(j=0;j<8;j++){  
 PWM1_Start();  
 delay_us(562);  
 PWM1_Stop();  
  if(dattt & 0x01){  
  delay_us(1687);  
  dattt=dattt>>1;  
  }  
 else  
  {  
  delay_us(562);  
   dattt=dattt>>1;  
  }  
  }  
 PWM1_Stop();  
  }  
  void send_data_command(unsigned char dat){  
  PWM1_init(36000);  
 PWM1_Set_Duty(127);  
 PWM1_Start();  
 delay_us(9000);  
 PWM1_Stop();  
 delay_us(4500);  
  send_data_byte(dat);  
  repeat();  
  }  
 void main() {  
 ADCON1=0x0F;  // disable ADC converter  
 CMCON=7; // to disable comparator  
 TRISA.F0=1;  
 TRISA.F1=1;  
 TRISA.F2=1;  
 TRISA.F3=1;  
 TRISC.F2=0;  
  
  PORTC.F2=0;  
 while(1){  
  if(PORTA.F0==0){  
 send_data_command(command_2);  
 while(PORTA.F0==0){  
 repeat();  
 }  
  }  
  if(PORTA.F1==0){  
 send_data_command(command_3);  
 while(PORTA.F1==0){  
 repeat();  
 }  
  }  
   if(PORTA.F2==0){  
 send_data_command(command_4);  
 while(PORTA.F2==0){  
 repeat();  
 }  
  }  
    if(PORTA.F3==0){  
 send_data_command(command_5);  
 while(PORTA.F3==0){  
 repeat();  
 }  
  }  
 }  
 }  

 

Receiver

 

 unsigned int count=0,sgnal=0;  
 int i=7,j=0,xr=0;  
 char txt[]="........";  
 char val[]="........";  
 void timer_routin(){  
 count++;  
  if(count>0xFF){  
   count=0;  
   TMR0L=0;  
  }  
 }  

 void interrupt()  
 {  
 if(INTCON.TMR0IF){  
  timer_routin();  
  INTCON.TMR0IF=0;  
 }  
 if(INTCON.INT0IF){  
  
  xr=count;  
  count=0;  
  TMR0L=0;  
   if(i<0){ i=7; }  
  if(xr==3){ // you may use if(xr==3||xr==4||xr==2){...}
   val[i]='0';  
   i--;  
   if(i<0){ i=7; }  
  }  
  else if(xr==6){  // you may use if(xr==5||xr==6||xr==7){...}
   val[i]='1';  
  i--;  
   if(i<0){ i=7; }  
  }  
  else{  
         /// For start signal or Repeat signal , i=0 and start to count  
   TMR0L=0;  
   i=7;  
   count=0;  
  }  
  INTCON.INT0IF=0;  
 }  
 }  
 void main()  
 {  
  ADCON1=0x0F;  
  CMCON=7;  
   TRISB=0x01;  
   PORTB.F6=0;  
    PORTB.F5=0;  
    PORTB.F4=0;  
    PORTB.F3=0;  
    T0CON=0xC1;  
  TMR0L=0;  
  INTCON.GIE=1;  
  INTCON.PEIE=1;  
  INTCON.TMR0IE=1;  
  INTCON.INT0IE=1;  
  INTCON.TMR0IF=0;  
  INTCON.INT0IF=0;  
  INTCON2.RBPU=1; // DISABLE PULUP REGISTER  
  INTCON2.INTEDG0=0;  
  while(1){  
  if(val[7]==val[0]){  
   txt[7]=val[7];  
  }  
  if(val[6]==val[1]){  
   txt[6]=val[6];  
  }  
  if(val[5]==val[2]){  
   txt[5]=val[5];  
  }  
  if(val[4]==val[3]){  
   txt[4]=val[4];  
  }  
 if(txt[4]=='0' && txt[5]=='0' && txt[6]=='0' && txt[7]=='1') {  
    PORTB.F6=1;  
    PORTB.F5=0;  
    PORTB.F4=0;  
    PORTB.F3=0;  
  }  
 if(txt[4]=='0' && txt[5]=='0' && txt[6]=='1' && txt[7]=='0') {  
    PORTB.F6=0;  
    PORTB.F5=1;  
    PORTB.F4=0;  
    PORTB.F3=0;  
  }  
 if(txt[4]=='0' && txt[5]=='0' && txt[6]=='1' && txt[7]=='1') {  
    PORTB.F6=0;  
    PORTB.F5=0;  
    PORTB.F4=1;  
    PORTB.F3=0;  
  }  
 if(txt[4]=='0' && txt[5]=='1' && txt[6]=='0' && txt[7]=='0') {  
    PORTB.F6=0;  
    PORTB.F5=0;  
    PORTB.F4=0;  
    PORTB.F3=1;  
  }  
  }  
 }  



Proteus Circuit :

IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : LAST PART ( END )


Watch Video for Proteus 8

 




IR (Infrared) Communication Between Two Microcontrollers -Step By Step Tutorial : Part-4


PART 1 : Basic Introduction 

PART 2 : Interrupt 

PART 3 : Timer

PART 4 : Calculation

PART 5 : LED Switching Project [END

 

 

Time Calculation:Part-4

In this part we will connect a push button with microcontroller which will create an external interrupt and we will calculate the time duration of that interrupt .


Calculation :

Now , we need to know how to calculate duration time of an event .
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : Part-4
IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : Part-4

First, we  know that clock frequency will be divided by 4 and secondly, it will go to prescalar. Finally, clock goes to timer register. 
So, if we use 12MHz clock and 1:4 prescalar. First we will get system clock (12/4)=3MHz clock or (12000000/4)=3000000Hz clock. Secondly it goes to prescalar and divided by 4 again. So we get (3000000/4)=750000Hz clock. 
We know that for each pulse TMR0L(Timer0) register is incremented by one. So when 750000 Hz clock successfully go to timer0 register and the TMR0L register increments for 750000 times. Is it clear? We have a problem here, our TMR0L register can only count from 0 to 255.
As we need to count 750000 or greater than 750000. We have to walk in another way. We will set an integer variable count which will be incremented for each overflow interrupt. That means, when TMR0L counts 255 and overflow interrupt occurs. So it gets reset and count is incremented by one. Actually when overflow interrupt occurs, it increases the value of count variable by one. That means count=count+1;

Now consider an External Interrupt situation on RB0 pin where count=3 and TMR0L(8bit Register)=123.


  How many pulses has been passed on that External Interrupt situation ?
Total pulses will be [On that situation]  
tp = (count * 255) + TMR0L;

Think about that, We are using 12MHz clock and finally we get 750000Hz clock from 12MHz clock.

So , What is the meaning of this 750000 Hz clock frequency ? 

It means, when 750000 pulses have been received, time is 1 second. We read the definition of frequency in physics. So the Time period t =(1/f);  The time required for one pulse.


Right Now, we can say that :

 tp=(count * 255)+ TMR0L ;

 750000 total pulses means = 1 second

so   1    ,,     ,,    ,,       =  (1/750000)second.
so  tp    ,,     ,,    ,,   = (tp / 750000)second. 
                          or [ (tp / 750000)*1000] miliseconds
                         or [ (tp / 750000)*1000000] microseconds  
                                                                
Using this method we can measure time duration of the interrupt.


MikroC Code of the Project :



  
 sbit LCD_RS at RB7_bit;  
 sbit LCD_EN at RB6_bit;  
 sbit LCD_D4 at RB5_bit;  
 sbit LCD_D5 at RB4_bit;  
 sbit LCD_D6 at RB3_bit;  
 sbit LCD_D7 at RB2_bit;  
 sbit LCD_RS_Direction at TRISB7_bit;  
 sbit LCD_EN_Direction at TRISB6_bit;  
 sbit LCD_D4_Direction at TRISB5_bit;  
 sbit LCD_D5_Direction at TRISB4_bit;  
 sbit LCD_D6_Direction at TRISB3_bit;  
 sbit LCD_D7_Direction at TRISB2_bit;  
 // End LCD module connections  
 unsigned int count=0,sgnal=0;  
 int chk=7,j=0,tmr=0,cnt=0;  
  float tp=0.00, tr=0.00;  
 char txt[]="    ";  
 char tmrl[]="         ";  
 void interrupt()  
 {  
  if(INTCON.TMR0IF==1){ // checking if overflow interrupt occurs  
  PORTC=0x00;  
  INTCON.TMR0IF=0;  // clearing the overflow intrrupt flag bit  
  count=count+1;  
  if(count>=0xFF){  
 TMR0L=0; // clearing the timer register  
 count=0; // clearing count  
  }  
 }  
 if(INTCON.INT0IF==1){  // checking if external interrupt occur  
 INTCON.INT0IF=0;  // clearing the external intrrupt flag bit  
  // so it will be wise , to reset timer before checking the interrupt flag  
 cnt=count;  
 tmr=TMR0L;  
 tp=0.00;  
 tr=0.00;  
 TMR0L=0; // clearing the timer register  
 count=0; // clearing count  
 tr=(cnt * 255) + tmr ;  
 tp= tr/750000;  
 tp=tp*1000; // sec to mili second  
  sgnal=tp;  
 }  
 }  
 
 void main()  
 {  
  ADCON1=0x0F;  
  CMCON=7;  
   TRISC=0x00;  
  Lcd_Init();  
  Lcd_Cmd(_LCD_CLEAR);        // Clear display  
  Lcd_Cmd(_LCD_CURSOR_OFF);  
  INTCON.GIE=1;  
  INTCON.PEIE=1;  
  INTCON.INT0IE=1;  
  INTCON.INT0IF=0;  
  INTCON2.RBPU=1; // DISABLE PULUP REGISTER  
  INTCON2.INTEDG0=0;  
  T0CON=0xC1;  // setting up the timer0  
  INTCON.TMR0IE=1; // enabling timer overflow interrupt  
  while(1){  
 PORTC=0xFF;  
 inttostr(sgnal,txt);  
 Lcd_Out(1,1,"Time in milisec");  
 Lcd_Out(2,1,txt);  
  }  
 }  


Proteus Circuit of the Project :

IR (Infrared) Remote Controlled Communication Between Two Microcontroller -Step By Step Tutorial : Part-4



Note: Perhaps, we can measure the highest time: probably it is [{(255*255)+255}/750000]*1000=87.04 milliseconds. So we can measure the accurate time for 87 milliseconds probably. Actually Push button is not perfect for this. You may use another variable to increase measuring capacity.You may send pulses having time period less than 87 milliseconds on RB0 pin.  I am suggesting you provide signal on RB0 pin from another microcontroller using PWM. It will be good for you! Thank You.

Watch the Video :



Share and Bookmark this Blog

Tags

: (1) 18F2550 (1) 36KHz (3) and (1) Based (1) battery (1) Bipolar (1) Blinking (1) blinks (1) Bluetooth (1) bluetooth device interfacing (1) bluetooth module (1) button (1) circuit (1) clock (1) control (1) crystal oscillator (3) Db9 (1) DC Motor (2) digital (2) Digital Voting Machine (1) digital voting machine using pic (1) display (2) DS1307 (1) electronic (1) embedded c programming tutorial (11) embedded c tutorial (11) experiment kit (4) external interrupt (4) flash (1) flashing (1) Gas Leakage detector (1) HC-06 (1) home (1) how (1) How to (10) i2c tutorial (1) in (1) indicator (1) infrared Connection (3) interface (8) interfacing (3) Interrupt (3) Introduction (1) IR Connection (3) IR Receiver (4) IR Transmitter (4) key pad (1) keypad (1) lavel (1) Lcd 16x2 (2) lcd 2x16 (2) led (1) lm35 (2) LPG (1) machine (1) make (1) Make bootloader (1) making (1) matrix (1) max232 (1) membrane keyboard (1) meter (2) Micocontroller (1) microchip (4) microchip pic (2) microchips (3) microcontroller (9) microcontroller based (3) microcontroller programming (3) Microcontroller Project (4) Microcontroller Projects (1) microcontroller_project (2) microcontrollers (4) Microprocessor (2) mikroC (5) mikroc code to start and stopstart and stop dc motor (1) mikroc pro for pic (2) Motion detector (1) MQ-9 Gas Sensor (1) musical (1) NEC Protocol (4) pcb (5) PIC (3) pic controller (11) pic microcontroller (11) pic microcontroller tutorial (11) pic programming (1) pic programming in c (12) pic proteus (1) Pic Tutorial (12) pic18 (2) pic18f2550 (11) picmicrocontroller (4) picRFモジュール (1) PIR Motion Sensor (1) printed circuit board (1) proteus (6) pulse width modulation (1) push (1) push button (1) PWM (1) real (1) rf transmitter (3) Rs 232 (1) Rs232 (1) scroll (1) scrolling (1) Serial communication (1) Serial Connection (1) Serial Port (1) serial port rs232 (1) Servo Motembedded c programming tutorial (1) simulation (2) Soil Moisture Meter (1) speed control (1) step by step (7) step bystep (1) Stepper Motor (2) text (2) Thief Detector (1) time (1) timer (4) timer0 (4) tone (1) TSOP38236 Receiver (4) tutorial (2) Unipolar (1) USART Connection (1) USB (1) usb 1.0 (1) USB bootloadere (1) USB HID (1) using (9) voltmeter (1) voting (1) water level indicator (3) with (2) work (1)

Live Traffic Feed


Live Traffic Feed
Live Traffic Feed

Comment Option isn't working properly

Comment option isn't working properly. If you have anything to say, you are requested to use the "Contact Form" below here.

Leave Your Message Here

Name

Email *

Message *

Google+ Followers

Like on Facebook